SEGA LTM is the ideal tool for planning and controlling the activities that are associated with persons and vehicles in high-traffic industrial, logistic, and port areas. Its agenda functionalities avoid exceeding the site´s capacity. Automated access control allows for a high flow of input and output. The solution also optimizes internal traffic and registers all the site´s activity.

FEATURES: MAXIMUM IMPACT RESISTANCE THANKS TO ENHANCED ELASTICITY HYGIENIC EASY CLEANING MINIMUM MAINTENANCE SEPARATE PROTECTIONS FOR EACH ELEMENT, SO NO IMPACTS TRANSMITTED CAN BE REPAIRED QUICKLY AND AT MINIMAL COST.

HIGH DENSITY POLYETHYLENE (HDPE) A highly resistant material showing a better performance than stainless steel and concrete. Complies with standards for materials in contact with food. ROD Steel rod A-4.6 permitting deformation without breakage. NEOPRENE Special neoprene to seal the protection joint and avoid any filtration. PVC PIPE PVC jacket for easy replacement of the rod. ANCHORING SYSTEM Guarantees maximum fixing and resistance for the protection and if necessary facilitates rod replacement. SOLID BODY Manufactured in solid pieces to give maximum resistance. Note also there’s no paint; pigment is in the material itself. This pigment is protected against UV rays.

Rugged PDA with ANDROID 13 GMS + AER IP65 Water-resistant Protection 4G Modem + Wi-Fi 5 + Bluetooth + NFC Long Distance 1D + 2D Reader - UHF RFID Reader Handle with Secondary Battery

Patented barrier that protects structures and pedestrians in areas meant for moving loads. Designed with an innovative mechanism that connects rails through a PIN plug and a special soft and shock-absorbing gasket. The barrier now is far more resistant when impacted.

PEVOLON® is a thermoplastic material based on polyamide. PEVOLON® wheels have high brasion resistance, a low friction coefficient, high load capacities and a long lifespan. The precise workmanship guarantees the functionality of swivel and fixed castor housings. Compact brake systems offer long-lasting, secure locking for all areas of application. The dimensions fulfil to the standards of the European manufacturers of castor.

PEVOLASTIC ® and PEVOTHAN ® wheels consist of a PEVOLON ® rim with a mechanically non-detachable, fixed polyurethane tread (Desmopan ® from Bayer AG, Leverkusen). The excellent Desmopan ® properties include high load capacity, non-marking properties, high abrasion resistance and good damping power. Due to its physical, thermal and chemical properties, it is superior to all standard rubber wheels and is thus recommended for sensitive surfaces. The dimensions of the precise processed swivel and fixed castor housings fulfil to the standards of the European manufacturers of castors

When the light beam emitted by a photoelectric sensor is interrupted or reflected by the object, the change in light patterns is measured by a receiver and the target object or surface is recognized. Photoelectric sensors are very common in industrial manufacturing fields such as material handling, packaging, food and beverage, medical, and many others. Depending on the style selected, they can be used with or without a reflector, be self-contained, long-range, heavy-duty, or compact. There are many different housing and mounting options to offer a correct fit that meets the demands of each application. They perform a wide variety of tasks and some of them can even be used in harsh environments.

Pick & Put-to-Light are picking methods based on light technology. The LED helps the operator to quickly find the exact quantity and location of items for picking or distribution. The aim is to speed up order picking and reduce errors in goods handling. WHO IS IT INTENDED FOR? - E-commerce operations - Logistics centers with heavy picking loads - Small products that are easy to handle, usually packed in boxes. - Large warehouses that group several orders in a picking route. - Warehouses with APPIA.adp (WMS) DISCOVER SOME OF OUR PROJECTS Intelligent locker: Warehouse operators will be able to perform a pick & put-to-light, agile, efficient and with error detection. How does it work? - It is necessary to make a massive extraction of a batch of orders and deposit it on the sorting table. - The front LEDs indicate in which box the read item should be left. - The rear LEDs light up as the orders are completed. - Thanks to color coding, several operators can work simultaneously on the same side of the locker. Picking cart: Intelligent device that allows simultaneous order picking, streamlining the work of operators and eliminating human errors! How does it work? - After reading the barcode, the box where the product is to be deposited is illuminated. - The green LED will notify that the product has been deposited correctly. - The red LED will notify that errors have been made. APPIA.button: Portable pick & put-to-light system. How does it work? - Configurable, WI-FI controlled and autonomous button. - LED light indicates the exact location where the operator should deposit the product - The button can be configured to emit an audible signal to guide the operator to the location where the goods are to be deposited - The push button validates the action and notifies the WMS of it

"Pick By Light systems" are easy-to-use, intuitive systems which leave the operator's hands free, have a short learning curve and do not require the use of any additional devices.

The PICK model is made of aluminium, equipped with a work platform and an electrically powered lifting load plane; Designed for industries, workshops and warehouses, since the platform allows work at height and the electrically powered work surface allows packages and packages to be lifted for storage on shelves. Equipped with front wheels, stabilizing base and patented SICUR-STOP movement and anchoring system. Power supply with rechargeable battery for the work surface. This product complies with the European standard EN 131 and is delivered together with the certificate of conformity and the instruction manual, the maximum load that it supports is 150 kg. TECHNICAL CHARACTERISTICS 50x40 cm work platform. 100 kg capacity. in the load plane. Non-slip steps of 15 cm. Available from 4 to 10 steps. CE marking

AI-powered robotic picking for maximum productivity and accuracy.

Pick-to-light devices and systems help industrial automation manufacturers reduce the risk of error in the assembly process, boosting product quality and reducing cost.

Our manual workstations have a highly ergonomic, user-friendly design for minimal error rates and maximum efficiency. Our PickStation workstation series by TGW is especially ideal for activities like repacking, VAS and packaging. Benefits: - HEALTH & EASE OF USE: The ergonomic design of the manual workstations guarantees an ideal working environment. - FLEXIBLE USE: Suitable for the most diverse work steps in the processes of goods receiving, order picking, packing and goods issue. - MAXIMUM PRODUCT SERVICE LIFE: Thanks to the use of proven state-of-the-art technologies, PickCenter One offers long service life and a very low total cost of ownership (TCO). - PATENTED CURVED DESIGN: Minimal changeover times of origin and destination boxes/bins thanks to a perfect curved design. - TARGET SEQUENCER: Constant performance of 600 picks per hour, thanks to direct connection of the target sequencer. - ONE WORKSTATION FOR EVERY LOAD: Ideal for cartons, totes and trays.

Preparación de pedidos y tecnologías de picking como pick-by-voice, RF picking, Pick-by-light, Pick-to-tote, Pick-to-bucket etc.