YASKAWA IBERICA, S.L.
Other news
Robot systems at YASKAWA: today and tomorrow
Besides standardized interfaces and the networked management of systems and processes, the automated manufacture of a single product according to individual specifications is also a key requirement of Industrie 4.0. YASKAWA is facing these challenges with
TIG Welding System from Yaskawa
TIG welding system from YASKAWA. Components: Robot MA2010 with 2-station Positioner VMS-1000SD
Yaskawa extends MotoLogix software interface
Robot programming now with EtherCAT connection The software interface MotoLogix enables Yaskawa Motoman robots to be quickly and easily programmed and controlled via PLC in the standard IEC-61131 environment. Now Yaskawa has broadened the spectrum of sup
Robotic Arc Welding installation with seam tracking and tilted column
Challenge AAF required a solution to automate the welding of large hoppers. These hoppers needed to be welded both internally and externally and therefore a solution was required that could reach practically any point on a part requiring welding and that
MOTOMAN HC10 - “Easy teaching” for collaborative operation
At Automatica, Yaskawa will be displaying a further development of the collaborative Motoman HC10 robot. The HC10DT (DT stands for “Direct Teach”) model variant can optionally be programmed directly via the robot arm. This “easy teaching” is made possible
MotoMINI extends the range of MOTOMAN models downwards
Small, but it packs a punch For Automatica Yaskawa has augmented its Motoman robot portfolio with what is now its smallest model: with a range of 350 mm the new MotoMINI can handle a payload of 500 g. As a lightweight, high-speed robot the compact 6-axi
Motoman GP series extended to accommodate payloads of 600 kg
Easy handling of heavy loads The Motoman GP series comprises compact and extremely efficient robots for high-speed joining, packaging and general handling applications. In time for Automatica, Yaskawa has widened its range by adding several new handling
Award for high design quality: Industrial handling robot Motoman GP8 receives Red Dot
The Red Dot jury has made its decision: After all of the products submitted were tested and assessed individually in the course of an evaluation process spanning several days, the handling robot Motoman GP8 by Yaskawa received the distinction “Red Dot”. T
Final packaging of medical-technical products with support from robots
An end-of-line packaging system from PKM Packaging is setting standards with an output of over 400,000 units per day. The groundbreaking system packages disinfecting caps for use in dialysis treatment.
Robot-based empties handling at the Paderborner brewery
Individual packaging is in vogue – in the brewing industry, too. For automated empties handling, however, this diversity means demanding requirements that are often newly introduced.